ISO source of M6 Torx screws

General discussions about wingfoiling: equipment, tips, problems, where to go, where you should have been, pump safety.
Post Reply
ninjaarmadillo
Posts: 12
Joined: Fri Jul 16, 2021 3:17 pm
Has thanked: 1 time

ISO source of M6 Torx screws

Post by ninjaarmadillo »

Is there a local source for M6 Torx (star head) screws?
Or does anyone know of a good online source?
Alex
Website Donor
Website Donor
Posts: 24
Joined: Mon Nov 15, 2004 12:59 pm
Location: Victoria, BC
Been thanked: 1 time

Re: ISO source of M6 Torx screws

Post by Alex »

Let me know if you find something, I'd split shipping with you if online is the only option.
User avatar
AJSpencer
Website Donor
Website Donor
Posts: 207
Joined: Sat Jun 22, 2019 7:18 am
Has thanked: 63 times
Been thanked: 9 times

Re: ISO source of M6 Torx screws

Post by AJSpencer »

Hillside and Rock Bay (in Victoria): FastenerForce One Resources
I got some SS torx there and they seem to have a big inventory. No titanium though, but sounds like SS is good enough.
https://www.fastenerforce.ca/contact/
Contact email and location address on that page.
Alex
Website Donor
Website Donor
Posts: 24
Joined: Mon Nov 15, 2004 12:59 pm
Location: Victoria, BC
Been thanked: 1 time

Re: ISO source of M6 Torx screws

Post by Alex »

Weird, I went there and they said they don't carry any Torx.
User avatar
grantmac
Posts: 250
Joined: Fri Jul 21, 2017 1:59 am
Has thanked: 4 times
Been thanked: 5 times

Re: ISO source of M6 Torx screws

Post by grantmac »

I definitely got some there.
jo$hd
Posts: 4
Joined: Fri Mar 17, 2017 3:58 pm

Re: ISO source of M6 Torx screws

Post by jo$hd »

Same topic but different question I'm hoping someone can help answer.

IS the hardware to attach the foil to board an M6 T-nut and machine screw? Is that something that fastener force would carry or is it winging specific? I have a PPC board and Moses foil. Last piece of the puzzle before I can get out and sail.

Cheers!
User avatar
grantmac
Posts: 250
Joined: Fri Jul 21, 2017 1:59 am
Has thanked: 4 times
Been thanked: 5 times

Re: ISO source of M6 Torx screws

Post by grantmac »

M6 or M8 depending on foil.

They might have the bolts but definitely won't have the nuts
jo$hd
Posts: 4
Joined: Fri Mar 17, 2017 3:58 pm

Re: ISO source of M6 Torx screws

Post by jo$hd »

Ok thanks for the reply. Do you know if there is anywhere that sells them or is that something that I need to get online.
User avatar
tweezer
Website Donor
Website Donor
Posts: 69
Joined: Wed May 14, 2003 8:57 am
Location: Victoria
Has thanked: 25 times
Been thanked: 28 times

Re: ISO source of M6 Torx screws

Post by tweezer »

Best chance of success is online - mac Kites or Silent Sports or North Shore Boards - maybe dirty mermaid or zen sports? Maybe Gyro boards in cadboro bay?
Post Reply