spreader bars

General discussions about kiting: equipment, setup tips, safety, where to go, where you should have been, lost and found
Post Reply
User avatar
speedy
Posts: 8
Joined: Sat Dec 17, 2005 11:43 am
Been thanked: 1 time

spreader bars

Unread post by speedy »

any feedback on pivot vs. regular spreader bars? Is one better than the other or safer?
Back to Top
Dan-o

Unread post by Dan-o »

I haven't heard about anybody else having the same problem but I've had the weld at the hinge area of the pivot bar tear almost completely apart on two different bars . They're waaaaaaaaaaay underbuilt ..... and unsafe in my opinion .
Back to Top
User avatar
KUS
Website Donor
Website Donor
Posts: 2808
Joined: Fri Jan 02, 2004 8:32 am
Has thanked: 6 times
Been thanked: 12 times

Unread post by KUS »

not sure about hinge or not but get the stainless steel bar, the alu bars corrode or bend and let go at inopportune times (is there ever a good time for this :roll: ) and the fewer moving parts the better things usually turn out 8)
Wish less, sail more!!
Vancouver Island Windsports
Chinook /Takuma /KA Australia (Tribal) /Aztron

You're either in or in the way....
Doing things the hard way since 1963....
Back to Top
local

spreader bars

Unread post by local »

:roll: The best is the heavy stainless bar,any moving parts are going to be problematic.Simple safe strong stainless. :lol:
Back to Top
Post Reply

Return to “Kiteboarding Discussion”