Windsurf foiling

General discussions about windsurfing: equipment, setup tips, problems, where to go, where you should have been, lost and found
User avatar
tempy
Website Donor
Website Donor
Posts: 372
Joined: Mon May 24, 2004 10:07 pm
Location: Nanaimo
Has thanked: 3 times
Been thanked: 1 time

Post by tempy »

I am in for the demo as well, Marty!
User avatar
MartyD
Posts: 246
Joined: Tue Dec 18, 2007 8:39 am
Location: Cook St
Has thanked: 1 time
Been thanked: 1 time

Post by MartyD »

Marty, any comment about whether there is anything like the 'fighter jet' ability to point what seems like damn near straight upwind?
Not quite as far as the kite foil, but still much more than any other windsurf craft. I could not really get it to roll much because of the big wing and board geometry. That is where the kite kills it, but Peter said he can get a slight roll on it once he had more practice.
User avatar
KC7777
Posts: 364
Joined: Mon May 03, 2004 11:30 am
Location: North Vancouver, BC

2018 Naish Windsurfing Foilboards

Post by KC7777 »

Hey,

I am down to 4.2, 4.8 and 5.3 sails....likely all you would need with this:

https://vimeo.com/216261957

Thoughts?
User avatar
bwd
Developer
Developer
Posts: 1245
Joined: Tue May 13, 2003 8:57 am
Location: In a van down by the jetty
Has thanked: 36 times
Been thanked: 40 times
Contact:

Re: 2018 Naish Windsurfing Foilboards

Post by bwd »

KC7777 wrote:Thoughts?
Maybe I should move this straight into the Buy 'n Sell section...
User avatar
winddoctor
Posts: 1119
Joined: Wed May 28, 2003 8:57 am
Location: Near Kook st.
Has thanked: 5 times
Been thanked: 20 times

Post by winddoctor »

:lol: :lol: :lol: :lol: :lol: :lol:
Poultry in motion
User avatar
TheLaw
Posts: 692
Joined: Fri Mar 18, 2005 11:54 am
Location: Cowichan Valley, BC

Post by TheLaw »

Perfect Cape boards
Give'R
User avatar
bwd
Developer
Developer
Posts: 1245
Joined: Tue May 13, 2003 8:57 am
Location: In a van down by the jetty
Has thanked: 36 times
Been thanked: 40 times
Contact:

Re: 2018 Naish Windsurfing Foilboards

Post by bwd »

KC7777 wrote:Thoughts?
I find it a little embarrassing that the actor mispronounces the product name a few times. I'm pretty sure it's pronounced "Nay-sh" not "Nash".
User avatar
uddereef
Website Donor
Website Donor
Posts: 27
Joined: Fri Feb 06, 2009 4:37 pm
Location: Nanaimo

2018 naish windsurfing

Post by uddereef »

Wonder what the learning curve is like.
User avatar
uddereef
Website Donor
Website Donor
Posts: 27
Joined: Fri Feb 06, 2009 4:37 pm
Location: Nanaimo

2018 naish windsurfing

Post by uddereef »

Think Ralphie is going to get a foil.I will buy it off him in a few years.
User avatar
KC7777
Posts: 364
Joined: Mon May 03, 2004 11:30 am
Location: North Vancouver, BC

Re: 2018 naish windsurfing

Post by KC7777 »

haha

I have heard talk of bwd's legendary understated humour....not bad.

I talked to some guys in the Gorge last year who were learning foil windsurfing at the time. Jibes looked really sketchy and difficult. But those guys were on homemade foils. I also just saw a Facebook post of Dale Cook jibing a foil windsurfer no problem....but he's not good to measure against.

Hopefully the Naish windsurf foils are a better design, from their testing and more user friendly. I don't think they would sell something that is too hard to sail.

The light wind potential is huge. Instead of kiting. Which didn't go well for me. At the Gorge, when I was on 6.0M/115L Fanatic Freewave the foilers were on 4.5M, and they were planing way easier/quicker than I was.

I'll probably get one. Could rip Hornby in 10 knots and 5.3M. But I bet they are gonna be costly.

K
Last edited by KC7777 on Mon May 15, 2017 8:02 pm, edited 1 time in total.
User avatar
nanmoo
Posts: 3105
Joined: Tue Nov 04, 2008 4:45 pm
Location: Triangle Mountain
Has thanked: 1 time
Been thanked: 7 times

Post by nanmoo »

Maybe just give kiting more than 6 hours of your time like you did learning windsurfing and save your money.
Don't forget to bring a towel!
Geoffy
Posts: 193
Joined: Sat Jan 20, 2007 12:01 pm

Post by Geoffy »

Yeah - LP foils running 2K USD, but the real kicker is replacement cost of the broken bits after a reef ding or two! Still, RN knows his stuff and is a great marketer and product developer, so maybe not as painful a learning curve as we saw down at HR last year??
We windsurf - life must be good!
User avatar
KC7777
Posts: 364
Joined: Mon May 03, 2004 11:30 am
Location: North Vancouver, BC

Foil windsurfers

Post by KC7777 »

nanmoo wrote:Maybe just give kiting more than 6 hours of your time like you did learning windsurfing and save your money.
I get that I would like kiting and didn't give it a chance. But those 6 hrs of kiting last May and getting hurt took away three weeks of prime windsurfing time. And my time to sail is gonna be limited.

Funny how I ask for analysis of option A and you direct me to do option B, without analyzing option A (pros/cons). You would fail a CPA exam with that approach!! It's like telling a skier they should snowboard when he asks what skis to buy.

I like the foil windsurfing as it looks technical in light winds (we all know sailing 6.0M and big board is boring) and you don't need larger sails.

I can see a foil and board costing $4.5k

The cost of a kite, lines and board is $2.5k

The main savings to a windsurfer is not buying any sails >5.3M. ie the cost of a 5.8M and 6.5M sail, plus a couple of masts >400cm (don't need a 430 and 460) and not buying a bigger boom is probably $2k savings?

We'll see.

Keith
Last edited by KC7777 on Mon May 15, 2017 8:05 pm, edited 1 time in total.
User avatar
bwd
Developer
Developer
Posts: 1245
Joined: Tue May 13, 2003 8:57 am
Location: In a van down by the jetty
Has thanked: 36 times
Been thanked: 40 times
Contact:

Post by bwd »

I like the idea of a wsurf foil. I could use it in Coles Bay in the 8-15kt aft south winds. I could handle the cost of a foil (maybe), but I don't want to get/pack around a dedicated big wsurf board. I've seen a few inflatable board options that seem interesting. Does the board do much once you are up on the foil?

http://www.mantafoils.com/product-page/ ... foil-board
User avatar
downwind dave
Website Donor
Website Donor
Posts: 1469
Joined: Thu Apr 29, 2004 9:05 am
Location: Cobble Hill

Post by downwind dave »

i have read that the board matters only in that you just need to be able to uphaul it, since waterstarting is not really possible. not because of the foil but because you use such a small rig.
Post Reply